Lab Diagram for 2006 CCIE Lab

Some background, I wrote this CCIE bootcamp in 2006 to be taught by a few of our CCIE instructors. However, because I didn't really have the time to update the course we stopped using and partnered with other providers.  I post it here so that those of you who want to try your hand at doing some free labs have the ability to do so.  Good luck.

Here are the diagrams that go with the labs, be aware that you should probably draw your own.

Old CCIE Labs that I wrote a few years ago.

Overview

This guide presents the instructions and other information concerning the lab activities for this course.

Outline

This guide includes these activities:

n  Lab 1-1:

n  Lab 2-1:

n  Lab 3-1:

n  Lab 4-1:

n  Lab 5-1:

Lab Guidelines (Required reading)

The use of Ascolta’s CCIE lab assumes that all labs will start with the starting config file.  The starting configs will be preloaded on the router and be provided to the learner as a download from www.ascoltalabs.com.

Assumptions:

n  READ THE WHOLE SCENEREO BEFORE STARTING LAB!  

n  All domain names will be ascolta (lower case).  Examples would be VTP, DNS etc.

n  All passwords and keys should be CISCO (upper case)

n  No static routes unless otherwise specified.

n  Student have the use of the Cisco documentation homepage found at:

                http://www.cisco.com/go/documentation

n  No frame-relay inverse-arp unless otherwise specified.

n  Any unused interfaces should be shutdown.

n  BBR1, BBR2 and BBR3 will be preconfigured and will not require any modification by the learner.  If there are any issues or questions with the equipment please consult the instructor.

§  BBR1 will have an IP address that changes every lab.  The last octet will be .254

§  BBR2 will have an IP address of 192.10..254

§  BBR3 will have an IP address of 204.12..254

n  All loopbacks must be reachable by all routers.  Unless otherwise specified.  All routers and switches will have at least one loopback interface with the format of 10.<pod>.<router>.<router>/24. 

n  Make sure that vlan.dat files are deleted from switches before starting a lab.